Leverage the Evaluation kit to get you started with your design journey. Plus, create up to 7 different camera configurations as needed, all on your own.
The Dragonfly S Evaluation Kit is meant for use with CS-mount models. Camera and heatsink are not included. A custom heatsink is required for board-level and partial case configurations.
The evaluation kit includes:
USB3, 1 meter, Type A-male to Micro-B (Horizontal Locking) Cable (ACC-01-2313)
Dragonfly S Universal Locking Bracket (ACC-01-0020)
0.3 m 6-pin JST Connector GPIO Cable (ACC-01-3015)
CS- to C-mount 5 mm Spacer Adapter (ACC-01-5004)
Tripod Adapter (ACC-01-0017)
Dragonfly S S-mount Front
Dragonfly S Thermal Pad
Items in the kit identified with part numbers can also be purchased separately.
- 제품
- 산업용
- 머신 비전 카메라
- 액세서리
- Development Kits
- Evaluation Kit for Dragonfly S CS-mount Cameras
[Missing text '/minicart/addedtocart' for 'Korean (Korea)']
[Missing text '/minicart/gotocart' for 'Korean (Korea)']
[Missing text '/minicart/shippinginfo' for 'Korean (Korea)']
Create up to 7 Configurations
Step 1: Select a CS-mount camera of your choice
- Monochrome, back USB connector (PN: DR-50Y2M-C1-CS)
- Color, back USB connector (PN: DR-50Y2C-C1-CS)
- Monochrome, side USB connector (PN: DR-50Y2M-C3-CS)
- Color, side USB connector (PN: DR-50Y2C-C3-CS)
Step 2: Add the Evaluation Kit (PN: EVAL-KIT-DR-U3)
Step 3: Create any of these configurations
- C-mount full case camera
- C-mount partial case camera
- CS-mount full case camera
- CS-mount partial case camera
- S-mount full case camera
- S-mount partial case camera
- Board-level camera without mount
Evaluation Kit Components
Item | What is it used for? |
S-mount front | Replaces CS mount front - enables use of M12 lens |
Optical C-mount 5 mm Spacer | Use a C-mount lens with the CS-mount front |
Tripod adapter | Mount the camera to a tripod (1/4-20 thread). This requires full or partial camera case |
USB cable | Connection to the PC |
JST cable | GPIO cable for trigger input, strobe output, or residual power |
Universal locking bracket | Stabilizes the USB connection on board level and partial case configurations |
Thermal Pad | Replacement thermal pad Original pad may become compressed following multiple configuration changes. |
Choice of Lens
Mount
S-mount or CS-mount front
C-mount 5 mm Spacer
Choice of Connector Orientation
Side or Back
Choice of Cased, Board-level, Partial Cased
For board-level and partial case Dragonfly S models, the universal locking bracket provides mechanical stability for the USB connector.
적용 제품
관련 문서
수출 제약 사항
수출 제약 사항
본 페이지에 명시되어 있는 정보는 수출통제규정에 의해 통제되는 이중용도 제품에 대한 내용입니다. 미 연방법에 위반되는 용도변경은 금지됩니다. 외국인 또는 해외 단체에 제품을 수출하는 경우, 별도 언급되지 않는 한 미 상무부의 사전 인가는 필요하지 않습니다.